Quality Assured Fasteners

A trusted partner with over 75 years experience in the fastener industry

About Us

IE Bolt & Nut (2012) LTD is a long established firm within the fastener industry, which specialises in manufacturing of both standard and non-standard bolts. All our products are manufactured in-house by our experienced team who have over 75 years of experience, enabling them to cater to any special requirements you may need.

ieb-photo-7.png
 
Under The Bridge

All our products, both standard and bespoke can be supplied in a range of finishes.

Products

Finishes

  • Blanks / Bolts DIN 931 - 8.8, 10.9, 12.9 M12 – M64

  • Blanks / Sets DIN 933 - 8.8, 10.9, 12.9 M12 – M64

  • Din 912 Cap Screws Grd 12.9

  • BS7419 - 8.8

  • BS1768 1963 Series Grd S / SAE 5 (ANSI B18.2.1) ½ - 2”

  • BS1768 1963 Series SAE 8/10.9 (ANSI B18.2.1) ½ - 2”

  • BS1083 1965 Series Grd R ½ - 2”

  • Nuts

  • Washers

  • Bright Zinc Plating (10.9 & 12.9)

  • Hot Dip Galv

  • Dacromet

  • Geomet / Zintec

  • Sheradized

If you require a 3.1 Cert they are available for 90 per cent of our stock range upon request. We are fully ISO 9001 approved for quality control to guarantee a high quality service.

 
Hands Screwing Up Bolts

Our Machine Shop is capable of producing bespoke nuts and bolts for unique customer projects

Services

As well as manufacturing we also stock a large range of bolt blanks from 10mm - 64mm Grd 8.8, 10.9, 12.9.

 

Any special requirements above 64mm can be made to order upon request. Nuts and washers are available to suit all bolts we offer.

As well as metric standard we also offer metric fine pitch, again upon request of the customer.

Imperial bolt blanks are also something we specialise in; we keep on the shelf 1/2” - 2”.

  • Grd R

  • Grd S

  • SAE 8/10.9
     

Offering UNC, UNF, BSW, BSF, 8UN threads.

  • Cutting

  • Non-standard Threading

  • Drilling

  • Chamfering

  • Course and fine pitch threads

  • Bolts to a drawing

  • Tie bars

  • Shoulder bolts

  • Studding

  • Machining

  • Thread UNF, UNC, 8UN/14TPI,
    BSW, BSF, 12TPI

Machine Shop

 

Approved Certification

If you require a 3.1 Cert they are available for 90 per cent of our stock range upon request. We are fully ISO 9001 approved for quality control to guarantee a high quality service.

acm-ikas-logo.png

We aim to provide an excellent service to our customers, so where possible if a job is needed urgently we try to dispatch same day or within 24 hour turn around.